Pedestrian Flap Barrier Gate

100% of 100

Quick Details:

  • Material : 304 stainless steel
  • Gate opening speed : 2.0s
  • Access speed : 15-20p/minute
  • Power input : AC 220V 50Hz
  • Drive motor : DC 24V motor
  • Access direction : Bi direction
  • Sense way : IR sensor
  • Brand Name: VARITO
  • Place of Origin: Germany

Pedestrian Flap Barrier Gate


Dimension : 1200 x 280 x 960mm

Material : SUS 304 stainless steel

Thickness : Top:1.2mm+body1.0mm

Passage Direction : Single directional/Bi-directional

Passage Width : 550MM

Sensor : 3 pairs of active infrared intrusion detector

Throughput Rate : 15-20p/m

Reaction Time : 2.0s

Driving Voltage : DC24V 4.2A

Standard channel width : 550mm

Working temperature : -20oC ~ 70oC

Motor : Brushed DC Motor

Mechanism : Half Height Flap Gate Mechanism

Indication : LED direction indication

Trouble-free operation : 5,000,000 times above


1. The flap barrier gate checks for errors when it is opened and sounds a warning siren if any are found.

2. At the main control panel, the operating state of the flap gate can be predetermined.

3. There is a stop-pinching feature. When the turnstile arms are about to close, the gate will automatically open
to safeguard the travelers as well as the gate itself.

4. The flap barrier turnstile gate has an audible and visible alarm. When the gate is in standby mode, its LED
is blue. When someone treads on it, green light comes out of it. When someone tries to use the gate route
without permission, it flashes red. To alert persons of the authorization violation, the bell on the gate beeps.

5. The gate also incorporates "Anti-Collision" technology, allowing the driving motor to halt and attempt self-
defense in the event that something slams into it too violently.

6. The data from the turnstiles is synchronized using a variety of channels.

7. If the visitor does not pass within the allotted time, the system will automatically withdraw their access permission
and it will by default return to the "waiting for open" status after 6 seconds. The user can choose the amount of time
they wish to wait before the gate reopens using the "waiting duration" parameter.

8. Whenever the electricity is turned on and off, the turnstile will automatically open and close.

9. In order to limit entry and leave, a walkway may be one way or two ways.

10. It can be connected to a variety of card reader devices, and can receive relay switch signals to work;

11. To make our gate more suitable for your projects, we can also do different settings for the gate or change
the gate design for different scenarios. You are always welcome to communicate with our sales team.

Write Your Own Review
You're reviewing:Pedestrian Flap Barrier Gate
Your Rating