Automatic Cantilever Gate

Art.Nr.:
ACG-001
৳0.00

Standard Gate Components:
Gate Body (with sliding beam, guide wheels).
Gate Post (2pcs, a four-pillars post and a two-pillars post).
Carriage Wheel Group (2pcs).
Special Gate Motor.
Drive Chain.
Gate Control Box.
Remote Controller (2pcs).
Airbag Pressure-wave Sensor.
Infrared Anti-bumping Detector.
Infrared Anti-climbing-over Alarming.
Emergency Button.
Opening / Closing Limit Sensor.
Clutch Spanner.
Pre embedded Board (3pcs).
Mounting Screws and Bolts.

Varito CG1000 Cantilever Sliding Gate in Bangladesh:

The Varito CG1000 Cantilever Sliding Gate is an automatic sliding gate that come in variety of widths and heights to suit site requirements.

The cantilever sliding gates are manufactured from RHS sections of sufficient strength to suit operating requirements which are dependent upon the gates opening width, height, type of infill (wind loading/weight) and the level of security required. 

Key features & benefits

- Access control and intercom systems.                              - High quality coating system.

- Galvanized/Zinc sprayed or powder/plastic coated.          - Bespoke built units.

- Manual Override facility.                                                     - Environmentally durable.

- Custom build to client specification.                                 - Operational under power failure conditions.

- Ease of installation.                                                              - Audible alarm / Flashing beacon.

- Safety edge / Safety photocells / Laser scanners.          - Serrated / barbed wire / wire toppings.

- High speed gate drive.                                                        - Pedestrian guard rail.

- Inductive loop systems.                                                      - Traffic lights & back indications systems.

- Matching infills and cladding. 

Product Description

These Automatic Cantilever Sliding Gates are an ideal solution where space behind the gates is on an incline or restricted.

With fully automated action and a wide range of access control options these gates are suitable for a wide range of applications including commercial and industrial. They also offer higher security than rising arm barriers.

This automatic cantilever gate has a manual release mechanism concealed within the lockable housing unit, allowing manual control of the gate in the event of a power failure. To aid in the safety aspect of the automatic cantilevered sliding gate, the portal is fitted with dual-height photo cells and rubber profile safety edges.

  • BS/EN 12453 Compliant
  • Requires - 230v, Single Phase, 50Hz, 10 Amps
  • Manufactured from Hi-grade Aluminum
  • Operated by a programmable logic controller, operated via an inverter (allows for programming of various parameters such as gate speed, passage timeout, automatic opening times, free exit loop operating times etc.)
  • Proximity sensors mounted in the main portal read the moving gate leaf, indicating the start and end of the travel cycle
  • Towards the back of the Gate’s opening area, a floor mounted support roller supports the weight of the gate in the fully open position
  • Anti-climb spikes are available for gates over 1500mm high
  • Variety of infill options available
  • CE Approved
  • Delivered as a complete unit and lowered on to pre-installed concrete plinths - Delivery is not free please see NOTES and Terms and CONDITIONS
  • Tracked gates DO NOT have a cantilever end but will need an additional 1-2m roll back

How to Automatic Cantilever Gate

ADDED BENEFITS

  • The gates are fitted as standard a number of safety devices
  • The gate portal is fitted with dual height photocells and 6 Category 3 monitored live safety edges
  • Corporate colors available on request
  • Ease of installation

OPTIONAL EXTRAS

  • Razor Wire Extensions
  • Electric Fence
  • Anti-Climb Spikes
  • Traffic Lights
  • Warning Siren
  • Timber Infills
  • Louvre Infills

OPTIONS FOR ACCESS CONTROL

  • Keypad
  • Proximity Cards
  • Voice/Video Intercom Access
  • Token Acceptors
  • Remote Control Fobs
  • Key Switch
  • Loop Detectors

Warranty Information

This product comes with a 1-year warranty as standard 

FEATURES OF CANTILEVER GATES:

Our line of durable cantilever gates is designed to close single openings up to 60 feet. When doubled, it will open up to 120 feet, making it a versatile solution for a wide variety of applications. Features and benefits of our cantilever gate products include:

  • Designed and built to order – suiting your specific project needs
  • Top track and top gate frame member are keyed to fully interlock with each other, then welded to form a one-piece composite structure
  • Stainless steel or galvanized cable cross-bracing along the entire gate length
  • Truck assemblies are designed for slide gate use and are tested under extreme load and weather conditions, a 5-year warranty on the W4 or S8 truck assemblies is standard
  • Self-aligning, sealed lubricant ball bearing wheels
  • Supplied with gap protectors and guide roller covers to protect against entrapment 

WHAT’S THE DIFFERENCE BETWEEN A CANTILEVER GATE AND A ROLLER GATE?

Cantilever gates and roller gates are both types of slide gates. Though similar on paper, cantilever gates feature a built-in counterbalance that allows them to extend further, making them more suitable for larger openings. Cantilever gates also have an interlocked one-piece structure that has fewer maintenance requirements than conventional roller-sliding chain link gates.

While cantilever gates require more room than swing gates or vertical lift gates, they are often a unit that’s safer, more secure, more reliable and easier to use.

CAN CANTILEVER GATES BE MOTORIZED?

chain-link driveway gates can be motorized for your convenience. We can match any gate system with an automatic operator that will deliver reliable performance with low maintenance requirements. We also offer a number of access control systems that simplify entry and exit, saving your security team time and effort.

Main Features

  • The cantilever sliding gate adopts Aluminum 6063-T5 material with elegant appearance and compact structure.
  • The gate is suspension sliding without any rails, it’s very easy and simple for installation and maintenance.
  • Anti-Bumping Function: In process of gate closing, if infrared detector sensed people or obstacles, the sliding gate will immediately stop to assure of security.
  • Anti-Pinching Function: In process of gate travelling, if people or obstacles contact safety airbag, and pressure-wave sensor will transmit signal to master control board to make the gate stop sliding. 
  • Anti-Climb-Over Alarming: If infrared detector sensed anybody to climb over gate, alarm in control cabinet will auto turn on, and the alarm can be turned off by stop-button or open-button of controller.
  • If any emergency happened, you can press Emergent ON/OFF button to cut off power and make the working gate stop immediately to assure of safety.
  • Once electric motor temperature exceeds 120 degree or the gate is working for a limited time, then the motor will auto stop working for protection and prolong its life time.
  • The gate is with desktop-controller and handheld-controller for remote control, and during the time of maintenance or power failure, gate clutch can be released and then the gate can be controlled manually.
  • The gate is with leakage protection to protect over voltage or current in control system to connect ground.
  • The gate works smoothly, stable and quiet with high security, low noise, low failure rate and long service time.
  • The gate is used to circumstances of -30°c to +70°c of high or low temperature, wind, rain, ice, snow, slope, over railway or track and even some other tough conditions. 

Gate Automation System :The cantilever sliding gate is with an advanced automation system which includes our patent horizontal motor and two pieces of carriage wheel group built in the base beam (sliding track), industrial drive chain, intelligent infrared sensors, master control box and remote controllers. It's with outstanding features of anti-bumping, anti-crushing, anti-climbing-over, working stable, low noise, thermal protection, leakage protection and so on. 

Motor Power: 400W
Voltage: AC220V±10% 50Hz (AC110V by customized)
Revolution Speed: 1350r/Min
Sliding Speed: 18-20 meters per minute

Electric Capacity: 18uF/450VAC

Working Noise: Less than 65db

The Best Environment Temperature:  -30°c to 70°c

Thermal Protection Temperature: 120°c

 

Write Your Own Review
You're reviewing:Automatic Cantilever Gate
Your Rating