ETD-100 Portable Explosive Detector

Art.Nr.:
COUNTS023
৳0.00

ETD-100 Portable Explosive Detector

Model: ETD-100
Display: 4.3″ color TFT touchscreen
Response Time:  8 seconds
Data Interface: USB 2.0, Wi-Fi (optional)
Detection Technology: Ion Mobility Spectrometry (IMS)
Detection Targets: Explosives, narcotics (dual mode)
Analysis Sensitivity: Nanogram (ng) level
Alarm Type: Visual and audible alarms

ETD-100 Portable Explosive Detector

The ETD-100 is a field-portable, laboratory-grade detection system that identifies inorganic salt-based explosives (nitrates, chlorates, perchlorates) in under 60 seconds. With intuitive touchscreen and ultra-low detection limits, it brings the lab to the checkpoint.

Key Features

  • Detects inorganic salt-based explosives (nitrates, chlorates, perchlorates) – the primary threat in homemade IEDs.

  • Rapid analysis – delivers results in less than one minute.

  • Portable and robust – designed for both mobile and stationary deployments such as checkpoints, border control and forensic labs.

  • Simple user interface – touchscreen operation with “red/green” alarm screens and audible alerts, minimal training required.

  • Non-radioactive technology – uses liquid phase Capillary Zone Electrophoresis (CZE) rather than ion mobility with radioactive source.

  • Low operational cost – minimal consumables (reagent cartridge, swabs, filters), automatic self-calibration and high throughput.

  • Network enabled – Ethernet, Wi-Fi and USB connectivity for data export and remote access.

Technical Specifications

Specification

Details

Detection technology

Capillary Zone Electrophoresis (CZE) – liquid phase, non-radioactive

Explosive types detected

Nitrates, chlorates and perchlorates (inorganic salt-based explosives)

Limit of detection

Approx. 20-60 ng depending on ion (typical)

Analysis time

Less than 1 minute (typical ~40–60 s)

Start-up / warm-up time

Typically 10-15 minutes

Dimensions (W × D × H)

48.8 × 38.6 × 22.9 cm (19.20″ × 15.20″ × 9.00″) 

Weight

14.5 kg (32.0 lbs) without reagent cartridge 

Operating temperature

+5 °C to +40 °C (40°F to 104°F) 

Power supply

AC 100-240 V, 50-60 Hz; DC 24 V DC, 3.75 A max 

Connectivity

Ethernet, Wi-Fi, USB 2.0 

Reagent cartridge capacity

Approximately 1,500 scans (typical) 

IP rating

IP63 when closed in Pelican case

Write Your Own Review
You're reviewing:ETD-100 Portable Explosive Detector
Your Rating