Bosch DCNM-WAP Wireless Access Point

The Wireless Access Point (DCNM‑WAP) is the central device of the DICENTIS Wireless Conference System. It links the Wireless Devices (DCNM‑WD and DCNM‑WDE) by means of secure wireless WPA2 communication. The compact DCNM‑WAP with built‑in web browser interface is all that is needed to set up, configure and control the DICENTIS Wireless Conference System. The Wireless Access Point can be placed unobtrusively on a wall, ceiling or tripod floor stand by using the included universal mounting bracket.
Easy to use

    Truly wireless, no need for an additional WiFi router for tablet control.
    Easy and intuitive web browser interface for system setup, configuration, control and licensing.
    Native support for camera control.
    Range test function to guarantee that all Wireless Devices are in range, independent of the selected WiFi frequency.
    Remote interfacing using API to control microphones and third‑party camera systems. Zero Interference
    Seamless automatic wireless frequency channel switching.
    Operates in the (license‑free) bands:
        2.4 GHz.
        5 GHz (UNII‑1, UNII‑2, UNII‑2 extended, and UNII‑3).
    Packet Loss Concealment to mask the effects of lost or discarded packets.

Standard WiFi
    Visibility in the IT infrastructure.
    Co‑existence with other WiFi networks.

General
    Powering via either: Power supply adapter, Power over Ethernet (PoE) or DCN multimedia System

Network Cable.
    Typical wireless coverage area range of 30 m x 30 m.
    Functionality is modular expandable via licensing.

Web interface
The DCNM‑WAP supports the following software functions which are available via the web browser interface (some      functions are not supported when a tablet device is used).

System cameras
    For giving a clear visual overview of the proceedings.
    Native support for a maximum of six HD Conference Domes with SDI connection can be connected to the system.

Standard configuration
    User management, which gives the possibility to create several users with user specific access to functionality.
    Line input/output and routing settings.

Key features of Bosch DCNM-WAP
    Stand alone usage, no central control unit needed
    Based on standard WiFi according IEEE 802.11n
    WPA2 encryption for secure communication
    Seamless frequency switching in the 2.4 GHz and 5 GHz band
    Powering via power supply adapter, Power over
    Ethernet or DCN multimedia System Network Cable
    Power supply adapter and universal mounting bracket included.
    Frequency Range 2.4 GHz and 5 GHz (ISM license free)

Technical Specs:
Supply voltage (PSU)   100‑240 Vac 50‑60 Hz in48 Vdc out
PoE   802.3af, 802.3at - type 1 mode A (endspan), mode B (midspan)
DCNM system supply   48 Vdc
Power consumption   10 W
Frequency response   80 Hz - 20 kHz
THD at nominal level   <0.1 %
Dynamic range   >98 dBA
Signal‑to‑noise ratio   >96 dBA
Ethernet   1000Base‑T IEEE 802.3ab
Jack nominal   -18 dBV
Jack maximum   +18 dBV
Jack nominal   -18 dBV
Jack maximum   +20 dBV
WIFI standard   IEEE 802.11n
Frequency Range   2.4 GHz and 5 GHz (ISM license free)
Mounting   Ceiling, Wall or Tripod floor stand (using included bracket)
Dimensions (H x W x D) with bracket   285 x 202 x 65 mm(11.2 x 8.0 x 2.6 in)
Weight: with bracket without bracket   958 g (2.11 lb)725 g (1.60 lb)
Color   Light grey (RAL 000 7500)
Operating temperature   5 ºC to +45 ºC(41 ºF to +113 ºF)
Storage and transport temperature   -20 ºC to +70 ºC(-4 ºF to +158 ºF)
Relative humidity   < 95 %, > 5 %